Whole house generator transfer switches let a standby or portable generator supply selected home circuits, or a broader household load, during an outage. My best overall pick is the Generac 200 Amp Next Gen Automatic Transfer Switch, Service Entrance Rated with SPD for buyers pairing a compatible standby generator with automatic, service-rated switching. The RXSW200A3 stands out for compatible Generac systems with power management, while the 200 Amp Manual Generator Transfer Switch suits shoppers who prefer manual operation and broad stated capacity. The main tradeoffs are automation versus hands-on control, service-entrance compatibility, generator match, and how much of the home you plan to power. Read on for the full comparison and guidance on choosing a switch that fits your electrical system.
Get backup power and energy gear delivered free — and shop member deals
- Fast, free delivery on millions of items
- Access to Prime Big Deal Days deals on October 6–7
- Prime Video, Amazon Music and more included
Complete the kit
Key Takeaways
- Automatic switching is tied to system compatibility: The Generac and RXSW200A3 options are aimed at standby setups, so buyers should confirm generator and controller compatibility before choosing.
- Service-entrance rating changes the installation plan: The Generac Next Gen model with SPD explicitly lists this rating; confirm whether that configuration suits your existing service equipment.
- Manual switches leave more decisions to the homeowner: The 200A and 100A manual models, double-throw switch, and EZ Generator Switch differ in stated capacity and format, so circuit coverage matters more than headline wattage alone.
- Generator capacity does not guarantee whole-home coverage: A listed 48,000W rating on manual options does not mean a generator can supply that load; match switch, generator, wiring, and managed loads.
- The 22kW Generac is a bundled system choice: It combines a home generator with transfer switching and cellular capability, while the other entries focus on switch equipment or manual switching.
| whole house generator transfer switch | Enclosure | Warranty | Voltage | Operation |
|---|---|---|---|---|
| Generac 22kW Whole Home Genera | — | 5-year limited warranty | — | — |
| Generac 200 Amp Next Gen Autom | NEMA 3R aluminum | 5-year limited warranty, including integrated SPD | 120 V / 240 V | — |
| 200 Amp Manual Generator Trans | NEMA 3R galvanized steel | — | — | Manual double-throw lever |
| MUJURUR 100A Generator Transfe | Galvanized steel, NEMA 3R | 10 years | — | — |
| RXSW200A3 200 Amp Automatic Tr | Aluminum, NEMA 3R | — | — | — |
| EZ Generator Switch Original P | — | — | 120 V | Manual, ON-OFF-ON |
| 200A Manual Generator Transfer | NEMA 3R, 1.5 mm galvanized steel | — | 120/240 VAC | Manual |
| Generac 200 Amp Next Gen Autom | NEMA 3R, powder-coated aluminum | 5-year limited | 120/240 V | Automatic |
More Details on Our Top Picks
Generac 22kW Whole Home Generator with Transfer Switch and Cellular Capability
The Generac 22kW is the only pick here that bundles the standby generator, transfer switch, and cellular monitoring into one home backup package. That makes it a better fit than the Generac 200 Amp Next Gen Automatic Generator Transfer Switch for buyers who still need the generator itself, while the separate switch is the more focused choice when a compatible generator is already installed. Automatic operation and remote alerts can help a household respond to outages without someone being home. The tradeoff is a more involved installation than a standalone switch, and Mobile Link cellular features require a premium subscription. Its 22 kW output also does not by itself guarantee that every home load can run at once; a qualified installer should match the system to the home’s demand.
Pros:- Includes a transfer switch with the 22 kW standby generator
- Cellular Mobile Link supports remote monitoring and control
- Electronic fuel and ignition control is designed to improve efficiency
- Oil-level sensing and cold-start support address common standby reliability needs
Cons:- Cellular remote monitoring requires a premium subscription
- Whole-home standby installation calls for professional planning and setup
- The generator and outdoor installation add more complexity than buying a transfer switch alone
Best for: Homeowners who need both a standby generator and automatic transfer equipment, and want cellular status updates while away
Not ideal for: Homeowners who already own a compatible standby generator or want a manual, lower-complexity transfer setup
- Brand:Generac
- Power output:22 kW
- Product type:Home standby generator
- Transfer switch:Included
- Connectivity:Cellular / Mobile Link app
- Monitoring:Remote monitoring and maintenance alerts
- Reliability features:Oil-level sensors and cold-start support
- Warranty:5-year limited warranty
Our verdict“Choose this bundled Generac system if you need a 22 kW standby generator and automatic transfer in one package, and can accommodate professional installation and a cellular subscription.”
Generac 200 Amp Next Gen Automatic Generator Transfer Switch, Service Entrance Rated with SPD
For a home with a compatible Generac standby generator already in place, this 200 A service-entrance switch is the most direct route to automatic whole-home transfer. Its service-entrance rating lets it replace the main disconnect, while the factory-installed surge protection adds a layer of defense for connected equipment. Compared with the RXSW200A3, this model is especially clearly specified for Evolution or Power Zone 200 controllers and includes a mechanical interlock. That narrower compatibility is also its main limitation: it is designed for single-phase Generac systems, not a universal generator connection. Replacing service equipment is substantial electrical work, so the convenience of automatic operation comes with a professional-installation requirement. Surge protection is included, but its stated warranty coverage is limited to five years.
Pros:- 200 A service-entrance rating can replace the main disconnect
- Transfers the home automatically between utility and compatible generator power
- Factory-installed whole-home surge protection is included
- NEMA 3R aluminum enclosure supports indoor or outdoor installation
Cons:- Compatibility is limited to specified Generac single-phase systems and controllers
- Service-entrance replacement requires professional electrical installation
- Integrated surge protection has a stated five-year warranty
Best for: Owners of compatible single-phase Generac standby systems who want automatic transfer at the service entrance and built-in surge protection
Not ideal for: Owners of other generator brands, manual-generator users, or anyone seeking a broadly compatible transfer switch
- Amperage:200 A
- Function:Automatic whole-home generator transfer switch
- Voltage:120 V / 240 V
- Phase:Single-phase
- Surge protection:Factory-installed whole-home SPD
- Enclosure:NEMA 3R aluminum
- Compatibility:Generac standby systems with Evolution or Power Zone 200 controllers
- Warranty:5-year limited warranty, including integrated SPD
Our verdict“This is a strong fit for compatible Generac owners who want service-entrance automatic transfer with built-in surge protection and can arrange professional installation.”
200 Amp Manual Generator Transfer Switch for Home, 48000W
This 200 A manual switch stands out for buyers who want a high-capacity connection and are comfortable operating it themselves. Its listed 48,000 W capacity is well above the 24,000 W figure given for the MUJURUR 100A switch, making it the stronger match on paper for homes with substantial loads. The double-throw lever provides a direct way to select utility or generator power and prevent backfeed, while the NEMA 3R enclosure allows indoor or outdoor placement. That simplicity avoids automatic controls, but it also means someone must be present to switch sources during an outage. The product data does not establish which generator sizes or specific service configurations are compatible, so buyers should confirm those details with an electrician before choosing it for whole-house use.
Pros:- Listed 48,000 W capacity suits higher-demand setups on paper
- 200 A rating provides a higher current rating than the MUJURUR 100A switch
- Double-throw lever separates utility and generator sources to prevent backfeed
- NEMA 3R galvanized steel enclosure supports indoor or outdoor use
Cons:- Manual operation requires someone to be present during an outage
- Professional or experienced electrical installation is recommended
- Product data does not specify generator compatibility or an included warranty
Best for: Homeowners seeking a 200 A manual transfer point for a high-load setup who can be present to change power sources
Not ideal for: Households needing automatic outage response or buyers who cannot verify generator and service compatibility before installation
- Amperage:200 A
- Power capacity:48,000 W
- Operation:Manual double-throw lever
- Enclosure:NEMA 3R galvanized steel
- Installation:Pre-installed wiring lugs
- Use:Indoor or outdoor
Our verdict“Choose this manual 200 A model if high listed capacity matters more than automatic operation and an electrician confirms it fits your generator and service.”
MUJURUR 100A Generator Transfer Switch, 120/240V, 24,000W, NEMA 3R
The MUJURUR is the manual-switch pick for buyers who value a 10-year warranty and can work within a 100 A rating. Its 120/240 V, ON-OFF-ON arrangement switches between utility and a backup source, while the galvanized steel NEMA 3R enclosure is intended for outdoor conditions. A lock hole and grounding point add practical installation details. Compared with the 200 Amp Manual Generator Transfer Switch for Home, this model has a lower current rating and a stated 24,000 W capacity, so it is less suited to a higher-demand whole-house setup. Both require manual source selection; neither provides the unattended response of the Generac automatic switches. The manufacturer recommends an electrician, and buyers should have the home’s loads and service configuration checked before treating this as a whole-house solution.
Pros:- 10-year warranty is longer than the five-year warranty listed for the Generac automatic switch
- 120/240 V manual double-throw operation switches between utility and backup
- Galvanized steel NEMA 3R enclosure is designed for outdoor use
- Lock hole and grounding point are included
Cons:- 100 A rating is below the 200 A manual and automatic options in this lineup
- Manual operation requires someone to switch sources during an outage
- Professional electrician installation is recommended
Best for: Homeowners who want a manually operated outdoor switch, have loads suited to 100 A, and value the stated 10-year warranty
Not ideal for: Homes requiring a 200 A transfer path, automatic operation, or a switch selected without a load and compatibility review
- Operating voltage:120 V / 240 V
- Operation mode:ON-OFF-ON
- Switch type:Manual double-throw
- Enclosure:Galvanized steel, NEMA 3R
- Maximum wire size:3 AWG
- Mounting:Wall mount
- Warranty:10 years
Our verdict“Consider the MUJURUR if a 100 A manual switch matches your electrical plan and the longer stated warranty matters more than automatic operation or 200 A capacity.”
RXSW200A3 200 Amp Automatic Transfer Switch with Power Management
Where several air-conditioning systems compete for generator capacity, the RXSW200A3’s management for up to four HVAC loads is its defining advantage. That feature can help coordinate what runs on backup power, which matters more than a basic switch’s transfer action for a home with multiple large climate loads. Compared with the Generac 200 Amp Next Gen Automatic Generator Transfer Switch, this listing emphasizes load management, while the Next Gen model specifies service-entrance replacement and factory-installed surge protection. The RXSW200A3 is listed for 8–24 kW standby generators and a 24,000 W rating, but the compatibility wording is narrow and should be confirmed for the exact generator and installation. It operates automatically and uses an outdoor-rated aluminum enclosure, though professional installation is recommended.
Pros:- Automatic transfer responds to utility outages without manual switching
- Power management supports up to four HVAC loads
- NEMA 3R aluminum enclosure is intended for outdoor protection
- Listed 24,000 W rating and 200 A designation suit a substantial standby setup when matched correctly
Cons:- Compatibility is specified for Generac RXSW200A3 and 8–24 kW standby systems
- Professional installation is recommended
- Product data does not list integrated surge protection or a warranty
Best for: Owners of compatible 8–24 kW standby systems who need to manage several HVAC loads during generator operation
Not ideal for: Manual-generator owners or buyers who need clearly documented service-entrance replacement, broad brand compatibility, or built-in surge protection
- Operation mode:Automatic
- Amperage:200 A
- Wattage:24,000 W
- Operating voltage:120 V
- Enclosure:Aluminum, NEMA 3R
- Load management:Supports four HVAC loads
- Generator compatibility:8–24 kW home standby generators; Generac RXSW200A3 compatibility specified
- Mounting:Panel mount
Our verdict“Choose the RXSW200A3 when compatible standby equipment and managing up to four HVAC loads are priorities, after confirming fit with an installer.”
EZ Generator Switch Original Patented Manual Transfer Switch
The EZ Generator Switch suits homeowners who want to keep a few key 120 V circuits running from a generator or inverter, rather than switch an entire 200 A home service. Its manual ON-OFF-ON operation helps route power without handling existing breakers, and support for bonded or floating neutral inverters makes it more flexible for solar and battery backup than a conventional generator-only setup. Compared with the 200A Manual Generator Transfer Switch, it is a smaller-scale option with a much lower stated capacity, so it cannot serve as a whole-house solution for larger loads or 240 V circuits. The tradeoff is deliberate: it focuses on essentials such as lights, refrigeration, heat, and a sump pump. At 120 V and 1,800 W, buyers need to match the selected loads carefully.
Pros:- Routes power to essential circuits without requiring users to handle existing breakers
- Compatible with battery and solar inverters using bonded or floating neutrals
- Supports common backup needs such as lighting, refrigeration, heating, and sump pumps
- UL/CSA/ETL approved and made and assembled in the United States
Cons:- The 120 V, 1,800 W capacity limits the number and size of loads it can support
- Manual operation requires someone to switch power sources during an outage
- Does not provide the 240 V whole-home coverage offered by larger transfer switches
Best for: Homeowners backing up a small set of 120 V essentials with a portable generator, battery inverter, or solar inverter
Not ideal for: Buyers seeking whole-house coverage, 240 V appliance support, or automatic transfer during an outage
- Operation:Manual, ON-OFF-ON
- Voltage:120 V
- Wattage:1,800 W
- Switch type:Rocker
- Mounting:Plug-in mount
- Compatible sources:Battery and solar inverters, generators
- Certifications:UL/CSA/ETL approved
- Country of origin:United States
Our verdict“Choose this switch for a modest, inverter-friendly set of essential 120 V circuits, not for whole-house backup.”
200A Manual Generator Transfer Switch, Double Throw Safety Switch, 48,000W, 120/240V, NEMA 3R
For buyers who want a 200 A, 120/240 V manual switch, this double-throw model offers a straightforward way to select utility or generator power for a home service. Its stated 48,000 W rating and NEMA 3R galvanized steel enclosure make it a more substantial whole-home candidate than the 120 V EZ Generator Switch, which is intended for selected essential circuits. The rotary ON/OFF/ON indicators, locking hole, and dedicated grounding position give the installer and homeowner clear, practical controls. Its simpler mechanical design avoids electronic components, but that does not remove the need for correct sizing and professional installation; an electrician is strongly recommended. Unlike the Generac 200 Amp Next Gen automatic switch, this unit will not detect an outage and transfer power on its own. That lower complexity comes with hands-on operation whenever the source changes.
Pros:- 200 A, 120/240 V rating is suited to a much broader home load than 120 V essential-circuit switches
- NEMA 3R galvanized steel enclosure is specified for indoor or outdoor use
- Double-throw mechanical switching includes clear ON/OFF/ON indicators and a lock hole
- Dedicated grounding position and stated capacity for wires up to 3 AWG support installation needs
Cons:- Manual switching requires someone to operate the switch during an outage
- Professional electrician installation is strongly recommended
- Its 200 A rating does not by itself confirm compatibility with every home’s service or generator
Best for: Homeowners with a suitably sized 120/240 V generator who want a high-capacity manual service transfer switch and can arrange electrician installation
Not ideal for: People who need automatic outage response, or buyers without a generator and electrical service matched to a 200 A switch
- Voltage:120/240 VAC
- Operation:Manual
- Switch type:Rotary, double throw
- Enclosure:NEMA 3R, 1.5 mm galvanized steel
- Mounting:Wall mount
- Compatible source:Generators up to 48,000 W
Our verdict“Pick this for broad-capacity manual backup when your service and generator are properly matched and you accept hands-on switching.”
Generac 200 Amp Next Gen Automatic Generator Transfer Switch
This Generac switch is the strongest fit here for owners of a compatible Generac standby generator who want the home load transferred automatically when utility power fails. Its 200 A, single-phase 120/240 V rating targets full-home service, while brownout protection helps avoid a transfer triggered by a brief voltage dip. The mechanical interlock is another useful safeguard against connecting utility and generator power at the same time. Compared with the 200A Manual Generator Transfer Switch, this model removes the need for someone to operate a rotary switch during an outage; that convenience depends on matching Generac Home Standby or Guardian equipment and the listed controller families. Its NEMA 3R enclosure allows indoor or outdoor placement, but buyers still need to account for installation and compatibility. It is a poor match for portable-generator setups or systems from other manufacturers.
Pros:- Automatically transfers a full 200 A home load to a compatible standby generator
- Brownout protection helps prevent transfers caused by temporary voltage drops
- NEMA 3R enclosure is rated for indoor or outdoor installation
- Mechanical interlock helps prevent utility and generator connections from being active together
Cons:- Compatibility is limited to specified Generac generator and controller families
- Professional installation may be required
- Fast-mount system is available only on select models
Best for: Homeowners installing a compatible Generac Home Standby or Guardian generator with an Evolution or Power Zone 200 controller
Not ideal for: Owners of portable generators or non-compatible standby systems who need a brand-neutral transfer switch
- Voltage:120/240 V
- Phase:Single-phase
- Operation:Automatic
- Enclosure:NEMA 3R, powder-coated aluminum
- Mounting location:Indoor or outdoor
- Compatibility:Generac Home Standby and Guardian generators with Evolution or Power Zone 200 controllers
- Warranty:5-year limited
Our verdict“Choose this for automatic whole-home backup if your standby generator and controller are on Generac’s compatibility list.”
How We Picked
I ranked these products by how clearly they address whole-home backup needs: compatibility with standby or portable generators, stated amperage and voltage, automatic or manual operation, service-entrance features, and any named power-management or weather-protection details. I also weighed how much information the product name provides about the intended setup. A high capacity claim alone was not enough to rank a switch highly, since the generator output and home electrical design determine what can actually run.
The Generac 200 Amp Next Gen service-entrance model leads for buyers seeking an automatic, service-rated option with SPD; the RXSW200A3 follows for compatible systems needing power management. The bundled 22kW Generac offers a more complete standby package, but it is less directly comparable to standalone switches. Manual models serve distinct installation and control preferences, with the 100A MUJURUR and EZ Generator Switch fitting narrower or simpler needs than the 200A manual and double-throw options. Buyers should verify listing details, panel fit, generator compatibility, and local code requirements before purchase.
| whole house generator transfer switch | Enclosure | Operation | Mounting |
|---|---|---|---|
| Generac 22kW Whole Home Genera | — | — | — |
| Generac 200 Amp Next Gen Autom | NEMA 3R aluminum | — | — |
| 200 Amp Manual Generator Trans | NEMA 3R galvanized steel | Manual double-throw lever | — |
| MUJURUR 100A Generator Transfe | Galvanized steel, NEMA 3R | — | Wall mount |
| RXSW200A3 200 Amp Automatic Tr | Aluminum, NEMA 3R | — | Panel mount |
| EZ Generator Switch Original P | — | Manual, ON-OFF-ON | Plug-in mount |
| 200A Manual Generator Transfer | NEMA 3R, 1.5 mm galvanized steel | Manual | Wall mount |
| Generac 200 Amp Next Gen Autom | NEMA 3R, powder-coated aluminum | Automatic | — |
Factors to Consider When Choosing Whole House Generator Transfer Switches
Choosing a transfer switch starts with your electrical service and the loads you want powered. These broader checks can prevent a mismatch that product wattage labels alone will not reveal.
Match the switch to your service and panel
Start by identifying your home’s service amperage, panel layout, and whether the switch must serve as service equipment. A 200A label does not by itself mean a unit is suitable for every 200A home installation. Service-entrance rating, overcurrent protection, and the existing meter and panel arrangement affect where the equipment belongs. Have a licensed electrician review the one-line diagram or panel details before ordering. A mismatch can require additional equipment or a different installation plan. This matters especially when comparing a service-entrance-rated Generac model with standalone manual switches whose names do not specify that role.
Plan circuits around generator output
Make a list of the loads you need during an outage, such as refrigeration, heating controls, a well pump, or selected lighting. Starting current from motors can be much higher than their running demand, so simply adding appliance labels may understate generator needs. A transfer switch routes power; it does not create capacity. Some systems manage loads to prevent the generator from being overloaded, while a basic manual arrangement may require the homeowner to choose what runs. Ask an electrician to account for both continuous demand and startup surges. This load plan is more useful than treating a stated switch wattage as the amount of power available.
Choose automatic or manual operation deliberately
Automatic transfer switches can move a compatible standby system to generator power after an outage, reducing the need to reach the equipment yourself. Manual switches usually involve a person operating the controls and following a defined sequence. That can suit portable-generator owners who want direct control, but it adds steps during bad weather or when nobody is home. Compare the switch with the generator’s starting system and controller; automatic behavior depends on a coordinated setup. Also ask who in the household can safely operate a manual system. Convenience is valuable, but it does not replace correct installation or safe generator placement.
Check generator and control compatibility
Transfer switches are not universally interchangeable, even when amperage and voltage appear to match. Standby generators may require a compatible controller, wiring harness, communications link, or specific switch family. Power-management features can also depend on supported accessories and configuration. Before buying, confirm the exact generator model and switch part number against the manufacturer’s compatibility information. If you are replacing an existing switch, record its model and wiring arrangement for the installer. This check is particularly important with Generac-branded automatic options and the RXSW200A3.
Account for location and environmental protection
Outdoor equipment needs an enclosure suited to its exposure, and the MUJURUR listing identifies a NEMA 3R enclosure. That designation gives buyers a useful starting point for weather protection, though installation details and local conditions still matter. Check the switch’s approved mounting location, clearances, conduit entries, and protection from standing water or physical damage. Indoor and outdoor placements can have different wiring and access needs. Ask the electrician whether the enclosure rating fits the exact location. Do not assume that a product intended for outdoor use can be placed anywhere outside.
Compare the full installation scope
The switch is only one part of a backup-power installation. Wiring, breakers, permits, utility requirements, grounding, generator inlet or standby connections, and inspection can all affect the project. A lower-capacity manual switch may serve a focused set of essential circuits, while a 200A automatic setup can involve broader service work and controls. Request an installation assessment before selecting between them so the equipment and labor plan align. Ask whether the quote includes required accessories and commissioning. Paying more can make sense when automation or load management solves a real household need, but extra capacity is not useful if the generator and panel cannot support it.
Frequently Asked Questions
Can a 200A transfer switch power my whole house?
It can be part of a whole-home setup, but the 200A rating describes the switch’s current handling, not the generator’s output. Your generator may not have enough capacity to run every large appliance at once. A qualified installer can calculate household loads and determine whether power management or selective circuit use is needed. Check that the switch is compatible with your service equipment and generator. The 200A manual and automatic models in this roundup should not be treated as interchangeable solely because their amperage matches.
Do I need an automatic transfer switch for a standby generator?
Many standby systems are designed to work with an automatic switch, but the required model depends on the generator and its controls. Automatic operation can restore backup power without someone manually changing the switch. Verify exact model compatibility, including any required controller or communication connection, before purchase. If you are willing and able to operate the system manually, a manual configuration may meet your needs, but it may not work with every standby setup. Have the generator manufacturer or installer confirm the correct arrangement.
Will a portable generator work with one of these transfer switches?
Some manual transfer switches are intended for portable-generator arrangements, but compatibility depends on the generator’s voltage, output, connection method, and the home’s wiring. The generator must have enough capacity for the circuits you plan to run, including motor startup demand. You will also need a suitable inlet and properly sized wiring installed according to local rules. Never connect a generator directly to a household outlet or improvise a connection. Ask an electrician to confirm the switch, inlet, and generator form a safe matched system.
What does service-entrance rated mean when choosing a switch?
A service-entrance-rated switch is designed and listed for a role at the point where utility service enters a building, subject to its installation instructions and applicable code. That can affect whether separate service disconnect equipment is needed and how the panel is arranged. It is a specific installation attribute, not a general sign that a switch is more powerful or suitable for every home. The Generac Next Gen model with SPD explicitly includes this description, but your electrician must confirm the fit with your service layout. Review the exact product documentation rather than relying only on a title.
Should I choose a 100A switch or a 200A switch?
Choose based on the service arrangement and circuits the installation is meant to support, rather than assuming the larger rating is always better. A 100A model may suit a more focused installation, while a 200A unit may fit a broader service configuration. Neither rating tells you how much power the generator can supply. Larger equipment may call for different wiring, space, and installation work, so the cost and complexity can rise without adding useful generator capacity. Have an electrician compare your panel, planned loads, and generator before settling on either size.
Conclusion
For most buyers building a compatible standby setup, I recommend the Generac 200 Amp Next Gen Automatic Transfer Switch with SPD as the best overall choice, especially where its service-entrance rating fits the home’s design. The 200 Amp Manual Generator Transfer Switch is my best value direction for shoppers who want manual control and need a higher-rated standalone option; confirm its connection and installation details first. For a bundled premium standby system, the Generac 22kW Whole Home Generator brings generator, switching, and cellular capability together. Beginners who want less coordination between separate components may prefer that integrated package, provided it matches their home’s requirements. For specific needs, choose the RXSW200A3 for compatible Generac power-management setups, the MUJURUR 100A for a lower-capacity outdoor-rated manual option, or the EZ Generator Switch when its particular circuit setup and approval details fit. Ask an electrician to validate the match before buying any of them.
Fall Picks
fall essentials
As an affiliate, we earn on qualifying purchases.
