TL;DR
Get backup power and energy gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Mitsubishi Heavy Industries is expanding overseas sales of its ETI-W centrifugal heat pump, which has been sold in Japan since 2025. The system can use low-temperature waste heat to produce hot water up to 90°C and has a maximum heating capacity of 640 kW; overseas availability, pricing and performance details have not been disclosed.
Mitsubishi Heavy Industries is expanding overseas sales of its ETI-W centrifugal heat pump, a system designed to recover low-temperature waste heat and produce hot water at up to 90°C. The move takes a product already available in Japan since 2025 into overseas markets, with industrial processes and commercial facilities among the uses identified by the company.
The ETI-W has a maximum heating capacity of 640 kW and uses HFO-1233zd(E) refrigerant, according to the report by Cooling Post. MHI describes it as a heat-recovery heat pump intended to capture waste heat from factory production processes and raise that heat to a temperature useful for hot-water supply. The source does not identify the overseas markets where sales will begin or give a rollout schedule.
MHI Thermal Systems says it plans to focus overseas sales on process applications in electronics, automotive, food, chemical and pharmaceutical factories. The company also identifies heating and hot-water supply at commercial and accommodation facilities as target uses. It says solutions will be configured for each customer’s circumstances, rather than describing a single standard system for all sites.
At facilities that already have chillers, MHI says the ETI-W can be incorporated to recover heat carried by the chiller’s cooling water and reuse it as high-temperature water. The company also points to data centres as a possible application: recovered heat could serve heating and hot-water demand. Cooling Post reports a heating COP of 4.01 while the system supplies water at temperatures up to 90°C. That figure is a reported performance result; the source does not provide test conditions or independent verification.
Industrial Heat Gets an Overseas Option
The expansion puts a high-temperature heat-recovery option in front of overseas factories and facilities that need hot water or process heat. Where a site has suitable waste heat, a heat pump can raise its temperature for reuse instead of leaving that heat unused. The potential value will depend on the site’s heat sources, operating pattern, hot-water demand and integration costs; the announcement does not quantify savings or emissions reductions.
The target sectors use heat in production and facility operations, so the system’s ability to deliver water up to 90°C is central to its intended role. The reported 640 kW capacity also gives prospective customers a scale reference, though actual output and suitability depend on installation conditions. For data centres and chiller-equipped buildings, the proposed approach is to make use of heat already present in cooling systems. Whether that can meet a facility’s needs will depend on how much heat is available and when it is needed.
For buyers, this is a market-expansion announcement, not evidence that the equipment is already broadly deployed overseas. The announcement gives no project list, order figures, pricing, operating-cost comparison or payback estimate. Those details will be needed to judge the commercial case at individual sites.
Products Worth Considering

Sonos Era 100 SL Compact Microphone-Free Speaker, Black

Samsung 75-Inch Class The Frame QLED 4K Art TV (LS03HE, 2026)

Ring Alarm 5-Piece Kit
As an affiliate, we earn on qualifying purchases.
From Japan Launch to Overseas Sales
MHI’s ETI-W has been available in Japan since 2025. A related Cooling Post report dated October 4, 2025, said the company had developed a centrifugal heat pump for the Japanese market that could use waste heat to supply water at 90°C. The current development is the company’s stated plan to expand sales beyond Japan, rather than a report of a named overseas installation or completed export order.
The heat pump is described as a centrifugal, heat-recovery system. Its stated operating concept is to take in low-temperature waste heat and deliver useful hot water at a higher temperature. In a chiller-equipped facility, MHI says the system can recover heat retained in cooling water. The overseas sales focus carries over the Japanese product’s industrial and facility uses, while the company says it will tailor thermal solutions to each customer.
“It will offer thermal solutions according to the specific circumstances for each customer.”
— MHI Thermal Systems, as reported by Cooling Post
Overseas Rollout Details Remain Open
The announcement does not say which countries or regions will receive the ETI-W first, when sales will start in each market, or whether the product requires local adaptations. It also provides no pricing, order pipeline, installation timetable or confirmed overseas customer projects. The phrase “expanding sales” establishes the direction of the move, but the supplied report does not specify the scale of the expansion.
Performance claims also need site-specific context. The reported COP of 4.01 is not accompanied by a test protocol, source-water temperature, operating conditions or details on how the figure was measured. No comparative operating-cost or emissions data are supplied. It remains unclear how the system will perform at different facilities and what installation changes, if any, will be needed to connect it to existing processes or cooling equipment.
Markets and Customer Projects to Watch
The next signs of progress will be MHI announcements naming sales regions, distributors or local service arrangements, followed by details of customer orders and installations. Those developments would show whether the overseas push is moving from a sales plan to operational projects. Prospective buyers will also need site assessments covering available waste heat, required water temperatures, demand profiles and integration with existing equipment.
Further technical and commercial information could clarify how the reported performance was measured and what costs or energy savings customers may expect under defined conditions. Until MHI or a customer publishes those details, the confirmed development is the company’s overseas sales expansion plan and the product specifications and applications reported to date.
Key Questions
What is Mitsubishi Heavy Industries expanding overseas?
MHI is expanding sales of its ETI-W high-temperature centrifugal heat pump, which has been available in Japan since 2025.
What does the ETI-W heat pump do?
It is designed to recover low-temperature waste heat and use it to produce hot water at temperatures up to 90°C.
What is the ETI-W’s reported capacity and COP?
The reported maximum heating capacity is 640 kW. Cooling Post reports a heating COP of 4.01 at water-supply temperatures up to 90°C, but the supplied report gives no test conditions.
Which facilities is MHI targeting?
MHI identifies electronics, automotive, food, chemical and pharmaceutical factories, along with commercial and accommodation facilities. It also describes potential use in chiller-equipped sites and data centres.
When and where will overseas sales begin?
The supplied report does not name overseas markets or give a sales-start schedule. It also does not identify confirmed overseas orders or installations.
Source: rss
